Elenco 3 1/2 Digit with Temperature Manual do Utilizador descarregar pdf (Página 13)

Measuring DC Voltage

1. Turn on the meter, then set up the meter to measure DC volts as

shown in Figure 6.

2. Insert the black test lead into the COM terminal and the red test

lead into the terminal.

3. Set the Function Rotary Switch to the ~V position (then, “AUTO”

and “mV” symbols are indicated on the display).

4. Connect the black test lead to the negative side of the circuit

under test and the red test lead to the positive side of the circuit.

The measured value is indicated on the display. If you connect

the test leads to the opposite polarity, the “–” symbol appears on

the display.

Figure 6. DC Voltage Measurement

-13-

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Sem comentários

Elenco 3 1/2 Digit with Temperature Manual do Utilizador Página 13